linkedn twitter facebook
Products Page
Compactor Sheet
Compactor Sheet
Compactor Sheet
Properties Unit Method Data
Physical - Mechanical
Density g / cm3 ASTM D792 2,00 - 2,10
Hardness - Shore D / ASTM D2240 ≥ 55
Tensile Stregth - Cd N / mm2 ISO 12086 / ISO 527 ≥ 18
Elongation At Break - Cd % ISO 12086 / ISO 527 ≥ 230
Deformation Under Load at Room Temperature After 24 Hours at 13,7 N / mm2 - Cd % ASTM D621 ≤ 10
Permanent Deformation As Above After 24 Hours of Rest at Room Temperature - Cd % ASTM D621 ≤ 6
Tribological
Dynamic Coefficient Of Friction / ASTMD1894 / ASTM D3702 0,07 - 0,14
Wear Factor K ASTM D3702 0,017 - 0,025
Thermal
Service Temperature (Min - Max) °C / -200 / +260
Thermal Expansion Coefficient (Linear) 25-100oC 10-5(mm / mm) / °C ASTM D696 10-12